Second-Gen iPhone UWB Range: Precision Finding for Warehouse Tags
Apple's second-gen UWB chip triples Precision Finding range. What that buys warehouse asset tags, and why FiRa 3.0 alone won't get you iPhone interop.
Apple's second-generation UWB chip, in every iPhone since the iPhone 15, delivers about three times the Precision Finding range of the original U1: roughly 60 meters line of sight versus 10 to 15 meters. For warehouse asset tags, that turns an iPhone into an aisle-scale finding tool instead of a last-step confirmation. Compatibility requires implementing Apple's Nearby Interaction accessory protocol. FiRa 3.0 certification covers Android and certified-device interop, but not iPhone.
Key takeaways
- Apple's second-gen UWB chip triples Precision Finding range to about 60 meters line of sight, versus 10 to 15 meters on the U1.
- Steel racking cuts that hard. Treat 60 meters as the ceiling and validate per aisle.
- iPhone interop requires Apple's Nearby Interaction accessory protocol via the MFi program. FiRa 3.0 certification does not cover it.
- One 802.15.4z radio, two protocol stacks: FiRa for Android and certified devices, Apple's spec for iPhone.
- Precision Finding is on-demand, one-to-one ranging. Continuous RTLS still needs fixed anchors on 15 to 30 meter spacing.
- Qorvo DW3xxx and NXP Trimension parts ship Apple-interoperable ranging support today.
How far does Apple's second-gen UWB chip reach for Precision Finding?
Apple's first UWB chip, the U1, shipped in the iPhone 11 in September 2019 and gave Precision Finding a working radius of roughly 10 to 15 meters. The second-generation chip, widely called the U2 though Apple's own materials just say second-generation Ultra Wideband, arrived with the iPhone 15, Apple Watch Series 9, and Watch Ultra 2 in September 2023. Apple's stated claim is three times the connection range of the U1, and launch coverage put iPhone-to-iPhone Precision Finding near 60 meters, about 200 feet, line of sight. Every iPhone since carries the same generation.
The radio itself did not change class. It is still IEEE 802.15.4z HRP UWB on channel 9 near 8 GHz, still a 499.2 MHz channel, still time-of-flight ranging good to roughly 10 cm. The gain is link budget and receiver sensitivity, which shows up as radius. A warehouse is not line of sight, though. Steel racking, dense pallets, and forklifts attenuate and scatter an 8 GHz signal, so treat 60 meters as the ceiling and validate per aisle. Triple the radius, nine times the area.
What does 3x range change for warehouse asset tags?
At 10 to 15 meters, a first-generation finding session covered a few rack bays. The worker had to already be close, which made UWB finding a pleasant last step, not a search tool. At 50 to 60 meters of open range, one session can span a full aisle or a staging lane, so a picker can start the arrow-and-distance workflow from the aisle entrance instead of walking the aisle first.
One design consequence catches teams off guard: discovery still runs over Bluetooth LE. The tag advertises over BLE, the app opens the session, and only then does UWB ranging start. With the second-generation chip, UWB can now outrange a weakly configured BLE advertisement indoors, which means your advertising interval and transmit power become the limiting link, not the UWB radio.
- BLE: discovery and session setup, so budget it for the radius you want
- UWB: distance and direction, duty cycled for battery
The pocket iPhone replaces the handheld reader.
What does an iPhone-compatible UWB tag actually require?
Compatibility is a stack, and the chip is the easy layer. A tag that shows up in an iPhone finding flow needs all of the following:
- Radio: IEEE 802.15.4z HRP UWB on channel 9, the band Apple uses for Nearby Interaction.
- Silicon: Qorvo DW3xxx series or NXP Trimension SR040 and SR150 class parts, which ship with Apple-interoperable ranging support.
- Protocol: Apple's Nearby Interaction accessory protocol, distributed through the MFi program, which defines how tag and phone exchange session configuration over BLE before UWB starts.
- App side: an iOS app using NINearbyAccessoryConfiguration; since iOS 16, background sessions let a paired accessory keep ranging while the app is not in the foreground.
- Power design: BLE advertising at idle, UWB only during an active finding session, which is what makes a coin cell tag viable.
Skip the protocol layer and you have a tag that ranges beautifully against your own dev kit and does nothing against an iPhone. Plan for Apple's spec from day one.
Does FiRa 3.0 certification make your tag work with iPhone?
No, and this is the most common planning mistake in tag roadmaps. The FiRa Consortium, whose members include NXP, Qualcomm, Samsung, and Bosch, certifies PHY and MAC conformance plus interoperability between certified devices, and FiRa 3.0 is the current specification generation. Certification is what gets your tag ranging against Android handsets that expose FiRa-based UWB, Samsung's Galaxy line being the main one, and against other certified infrastructure.
Apple is not a FiRa member, and iPhones do not carry FiRa certification. Interop with the second-generation chip runs exclusively through Apple's own Nearby Interaction accessory protocol. So a tag that must work with both ecosystems ships one 802.15.4z radio and two protocol stacks: FiRa for Android and certified infrastructure, Apple's accessory spec for iPhone.
Budget the second stack into the schedule up front. Teams that discover it after FiRa certification end up running a second firmware effort late.
FiRa talks to FiRa, not to Apple.
Can phones replace fixed anchors for warehouse tracking?
For finding, yes. For tracking, no, and the distinction is pull versus push. Precision Finding is user-initiated, one-to-one ranging: a person asks where one tagged asset is and gets an arrow plus a live distance. It reports nothing about the other ten thousand pallets, and nothing while no one is asking.
Continuous RTLS, the kind that feeds a WMS with live positions, still requires fixed infrastructure: UWB anchors on 15 to 30 meter spacing running TDoA or two-way ranging, with cabling, time sync, and a location engine behind them. The second-generation chip does not change that math.
What it enables is the hybrid pattern. Use cheap zone-level presence from BLE or existing scans to answer which aisle, then the worker's iPhone covers the final 30 to 60 meters down to the exact tote. You install far fewer anchors, or none, and spend the savings on tags. Anchors for coverage, phones for the last meter.
Where licensed positioning IP shortens the build
Everything above the radio is the hard part: ranging session protocols, multipath rejection, fusing UWB with inertial and vision data, tag power management, and the finding workflow itself. All of it is heavily patented ground, and a team shipping an iPhone-compatible warehouse tag is building squarely inside it.
Position Imaging licenses hundreds of granted patents in radio-frequency ranging, real-time positioning, and hybrid tracking, a portfolio cited in filings by Apple, Bosch, and other major firms. Granted patents in the pool, including US 11,774,249, US 12,079,006, US 12,066,561, and US 12,000,947, map onto what a UWB asset-tag product has to implement to ship. Licensing that layer instead of re-deriving it means your engineering year goes into the picker workflow, the tag enclosure, and the WMS integration, with freedom to operate underneath, typically in months rather than a multi-year patent-clearing slog. License the ranging layer, build the workflow.
Frequently asked questions
What is the range of Apple's second generation UWB chip?
Apple states three times the range of the first-generation U1, and coverage at the iPhone 15 launch put Precision Finding near 60 meters, about 200 feet, line of sight. The U1 worked at roughly 10 to 15 meters. Indoors, steel racking and dense inventory reduce that substantially, so validate per site before committing to a workflow.
Does FiRa 3.0 certification make my tag work with iPhone Precision Finding?
No. FiRa certification covers conformance and interoperability among FiRa-certified devices, and Apple devices are not FiRa certified. iPhone interop requires implementing Apple's Nearby Interaction accessory protocol, available through the MFi program. Tags targeting both ecosystems ship one radio and two protocol stacks.
Which UWB chips can I put in a tag for iPhone compatibility?
Qorvo's DW3xxx series and NXP's Trimension SR040 and SR150 both support IEEE 802.15.4z on channel 9 with Apple-interoperable ranging. The chip alone is not enough, though. Firmware implementing Apple's Nearby Interaction accessory protocol is what completes the interop.
Can iPhones replace fixed UWB anchors in a warehouse?
For on-demand finding of a specific asset, yes, and the second-generation chip makes that practical at aisle scale. For continuous tracking of thousands of assets feeding a WMS, no. Precision Finding is user-initiated one-to-one ranging, so continuous RTLS still needs fixed anchors or a hybrid zone-plus-finding design.
How accurate is Precision Finding at long range?
UWB time-of-flight ranging holds roughly 10 cm distance accuracy on a clean link. The direction arrow, which comes from angle-of-arrival across the phone's antennas, degrades near the edge of range and in heavy multipath. Within an aisle, expect reliable step-by-step guidance to the exact bay.
Send us your tag spec and target finding workflow, and we will map it against the portfolio patent by patent.
Tell us the product. We map the exact scope, what a license covers, and how fast you can ship, all in a 20-minute call.
Book a 20-minute call